Surge Suppressors for Husky Pumps
| Part No. |
Inlet/Outlet |
Max Inbound
Fluid |
Regulated Pressure |
Max. Delivery |
Wetted Parts |
| 224892 |
3/4 npt(f) |
100 psi |
0-100 psi |
16 gpm |
Alum/PTFE |
| 224893 |
3/4 npt(f) |
100 psi |
0-100 psi |
16 gpm |
Alum/Buna-N |
| 224894 |
3/4 npt(f) |
100 psi |
0-100 psi |
16 gpm |
SST/PTFE |
| 224895 |
3/4 npt(f) |
100 psi |
0-100 psi |
16 gpm |
SST/Buna-N |
Surge Tank for Medium Volume Hi-Flo Pumps
| Part No. |
Inlet/Outlet |
Max Inbound Fluid |
Max Delivery |
Wetted Parts |
| 220157 |
1 x 1 1⁄4 npt(f) |
600 psi |
15 gpm |
Carbine, SST, UHMWPE, Viton, PTFE |
| 233736* |
3/4 BSPP(f) |
360 psi |
NA |
SST, PTFE |
*Waterborne compatible
Surge Tank for High Volume Hi-Flo Pumps
| Part No. |
Description |
Inlet/Outlet |
Max WBR |
Max Delivery |
Material |
| 238986 |
Surge Tank |
2 npt(f) |
300 psi |
20 gpm |
SST, PTFE |
| 238987 |
High-Flo Surge Tank |
2 npt(f)* |
300 psi |
20 gpm |
SST, PTFE |
| 238988 |
High-Flo Surge Tank |
1-1⁄2 npt(f)* |
300 psi |
20 gpm |
SST, PTFE |
| 218509 |
High-Flo Surge Tank |
2 npt(f)* |
300 psi |
20 gpm |
Carbide, SST, UHMWPE, Viton, PTFE |
*Sanitary Tri-Clamp compatible
Note: Maximum flow rates are recommended maximums for peak performance. Exceeding these values reduces the surge tanks ability to dampen pulsation.
Floor Stand
| Part No. |
Description |
| 218742 |
Floor stand for surge tank 220157, 238983, 238984, 238985 |
SR200 Fluid Pressure/Surge Regulators, Air-Operated (Viscosity up to 500 cps)
For use with High-Flo pumps. Air-operated/low pressure. Install downstream from system surge tank. Compatible with both waterbase and solvent-based coatings.
| Part No. |
Fluid Inlet/
Outlet |
Max. Inbound Fluid |
Regulated Pressure |
Max Delivery |
Wetted Parts |
| 223883 |
2 in sanitary
clamp |
300 psi |
0-260 psi |
20 gpm |
304, 316, 316L and 17-4 PH SST, carbide, PTFE |
| 235282 |
1-1/2 npt(f)
sanitary clamp |
300 psi |
0-260 psi |
20 gpm |
304, 316, 316L and 17-4 PH SST, carbide, PTFE |
Includes air pilot port 1⁄4 npt(f) max, 100 psi
Note: For material viscosities less than 5 centipoise, regulator should be tested by customer before making multiple regulator installations. Very low viscosities regulation at low pressure may not be possible.